Behind the Gold House Restaurant at 135 N Main St. in Nahunta, Georgia, there’s a small skatepark with mini ramps, curbs, and other surfaces to skate. It’s right on the edge of a thick wooded area.
Tag: Georgia
-
Post Office in Hortense, Georgia
Located next to the train tracks crossing Highway 32 just west of the Hwy 32/Hwy 301 intersection is the nondescript Hortense, Georgia United States Post Office. It has a plaque stating,:
THIS BUILDING DEDICATED TO PUBLIC SERVICE 1968 LYNDON B JOHNSON PRESIDENT OF THE UNITED STATES W. MARVIN WATSON POSTMASTER GENERALOne of my earliest memories is going into the post office with my mom when I was a very young child–about 12 or 13 years after the building was dedicated. There wasn’t grass and weeds growing in the cracks of the concrete, and the parking lot wasn’t as sandy as it is now.
While reading about W. Marvin Watson, I learned that he eulogized Lyndon B. Johnson at his state funeral, which you can watch here. This is a poignant passage considering today’s state of affairs where politics are winner-take-all, zero-sum game, and without the hope of compromise:
"He was ours and we loved him. Beyond any telling of it he shared his victories and he shared his defeats. In victory, he taught us to be magnanimous. In defeat, he taught us to be without hate, to learn, to rally, to accept the challenge, and to try again. He believed that good men together could accomplish anything even the most impossible of dreams. No matter who his opponent, he constantly sought to find that touchstone within the soul of every man which if discovered would release the impulse for honest and fair solution. Hate was never in this man's heart."
-
Homestead in Hortense
While I was visiting my parents earlier this month, I took some pictures around their house, shop, and driveway. Despite the hurricane and everything else, it was nice being around so much nature everyday.
This is the same place where I took photos of the night sky and easy to spot constellations back in January.
-
Finnish Community Roots in McKinnon, Georgia
About a third of the way between Hortense and Jesup in Georgia is the Wayne County community of McKinnon, whose history includes the arrival of Finnish immigrants who wanted to develop this land after World War I. Their arrival was initiated by a group of Finns in Brooklyn, New York who advertised and convinced other Finns in the northeast USA to invest and move to this part of southeast Georgia.
Above is a picture of the old school house, and below are some street signs representing the community’s Finnish roots.
Sauna St, and E and W Kallio St
Looking back at my photos, I realize now that I forgot to take a photo of Finland Street, because that was where I was standing!
Looking East and West on US 301 from the Center of McKinnon
-
Plastic Point-of-Failure on a 60kWh Generac Whole-House Generator
As I wrote about last week, my parents’ Generac 60kWh whole-house generator died when we needed it most–at the beginning of a five day stretch without power after Hurricane Helene had passed through Georgia.
For shorter power outages, the Generac generator has worked, but in this case, when it really mattered, it couldn’t fulfill its promise to supply power to the house for an extended period of time. This meant that we could not pump water from our well, all of our food in the refrigerator spoiled, the radon remediation system wasn’t running, the mobility assists for my folks couldn’t operate, and the air conditioner was out (and the temperatures were in the high 80s/low 90s).
What specifically caused the Generac generator to quit running after about 48 hours was a busted plastic tensioner pulley that split in half as shown below.
A belt tensioner applies tension to a larger sized belt so that the belt maintains the appropriate tension to transfer work from one pulley to another. If the belt is too loose, it won’t grab and rotate. If the belt is too tight, it might break. The tensioner pulley–along in this case with the right size spring–keeps the right amount of tension in the belt so that it rotates without breaking.
The trouble that I have with this failure is how Generac made a couple of engineering choices that led to this failure. First, there is the overly complicated transfer of power from the engine (in the middle of the generator) to the opposite side of the radiator. They could have had the fan connected directly to the engine block or an assemblage connected to the engine block on the engine-side of the radiator so that the fan pushed air through the radiator instead of pulling it through as in the manufactured configuration. This would have reduced the number of parts–the extra pulleys, rods, bearings, and tensioner–and eliminated the tensioner pulley. Second, if their designers were adamant that a fan pulling instead of fan pushing configuration was better, they could have manufactured the tensioner pulley out of metal, and even better yet, used a standard tensioner pulley that was already mass produced for other applications. While this might have added some cost or reduced their profit by a very infinitesimal percentage of the cost of this generator (~$30k), it would have significantly reduced the likelihood of this part as being a possible point of failure.
My folks have had this Generac generator long enough that its warranty lapsed in 2023. They have paid for regular maintenance–checks, oil changes, etc. It has run a test every two weeks since they purchased it. But, there was apparently no way to verify the tensioner pulley or a schedule to replace it.
We were told by the repair crew that one other customer had the exact same problem–like ours, their generator had run after the area lost power and then their tensioner pulley had exploded in half just like ours.
If you’re considering one of these for your house, be aware of the possible points of failure–there are many besides this pulley. A less complicated design seems better to me to reduce the chance of failure. With a complicated setup like this, having replacement parts on-hand is a must, which our local retailer did not have. With lesson learned, my folks now have a spare tensioner pulley and belt just in case.
